List after command selection, Modifying parameters and deleting lus, Modifying lu parameters – HP StorageWorks XP Remote Web Console Software User Manual
Page 96: Deleting lus, Modifying lu parameters deleting lus, Viewing xp continuous access pair status for lus, Modifying parameters
List after command selection
After the pane closes, only LUs selected in step 2 of the procedure described in the
procedure for XP Continuous Access pair operations” (page 95)
are displayed in the list. Items of
the list also change. The Volume list in this status is called the Pair Settings Parameter list. Items of
the Pair Settings Parameter list depend on the command clicked from the pop-up menu and the
operation performed. Items for each command are described in the following sections.
The Set button on each parameter pane presets parameters to the Pair Settings Parameter list. To
apply parameters to the system, click Apply on the XP Continuous Access main pane.
The Cancel button closes the pane, but does not set parameters. The Cancel All button returns to
the Volume list.
Modifying parameters and deleting LUs
After pair settings operations, LU parameters can be modified individually. LUs selected to be the
pairs can be deleted.
Modifying LU parameters
1.
Click the LU on the Pair Settings Parameter list.
2.
Right-click, and click Modify. A pane appears.
3.
Modify parameters, and click Set.
4.
Click Apply on the XP Continuous Access main pane to apply modifications.
Deleting LUs
1.
Click the LUs on the Pair Settings Parameter list.
2.
Right-click, and click Omit. LUs selected in step 1 are deleted from the Pair Settings Parameter
list, and deleted LUs are out of pair settings operations.
3.
Click Apply on the XP Continuous Access main pane to apply the deletion.
The Cancel All command deletes all LUs listed on the Pair Settings Parameter list, and all LUs are
removed from pair settings operations. LUs can also be deleted using the Omit command and
selecting all LUs on the Pair Settings Parameter list. When all LUs are deleted (by the Cancel All or
Omit command), the list status becomes the Volume list.
Viewing XP Continuous Access pair status for LUs and LDEVs (Pairdisplay)
The Pairdisplay command displays detailed XP Continuous Access pair status information.
1.
From the Volume list, click the LU.
2.
Right-click, and click Pairdisplay. The Pairdisplay pane appears (see
).
The Pairdisplay command can be selected if Subsystem, CU number, or Port number is selected
in the tree.
96
Performing XP Continuous Access configuration operations