HP StorageWorks XP Remote Web Console Software - Manual (Page 60)

•
RCU Port: Port number on the RCU side when the M-R path is fibre.
•
Link Adr: Link address when the M-R path is serial. (Serial is not supported now.)
Port tree and Port list
Click Port in the Switch Display box to display the Port tree and Port list. The Port tree displays
channel adapters (fibre: ) and port types (Target: , RCU Target: , Initiator: ,
External: ), Initiator/External . Only ports that can be selected for remote copy operations
are displayed.
Figure 25 RCU Operation pane with the Port option button selected
•
Port: Cluster and port number (1A - 2R).
When the speed mode is standard, two port numbers are displayed in a row, and the speed
mode can be modified on a two- port basis.
When the speed mode is high, the port number is displayed on a package basis, and the
speed mode can be modified on a package basis.
•
Attribute: Port type (Initiator, Target, RCU Target, External, Internal/External, RCP, or LCP).
•
PCB Mode: Speed mode of the port (only for the fibre packages): standard, high-speed,
high-speed (2 port), or MIX.
•
CU: Range of CU images (00-0F or 10-1F), which is displayed only for serial ports.
In the Port tree, port type can be selected to display specified information in the Port list. For
example, when Initiator is selected in the Port tree, the system looks for ports of Initiator from all
ports entered, and lists Initiator ports in the Port list. Only one port type can be selected in the tree.
Asynchronous Operation pane
The Asynchronous Operation pane displays consistency group information for the connected disk
array and provides access to the XP Continuous Access Asynchronous pair operation (see
“XP
Continuous Access Asynchronous operations” (page 81) ).
The Asynchronous Operation pane is updated when the tab is switched from one to another,
Refresh is clicked, and settings are applied.
60 Starting XP Continuous Access