HP StorageWorks XP Remote Web Console Software - Manual (Page 53)

NOTE: The scripting function is not supported for this version.
XP Continuous Access main pane (Pair Operation pane)
The first pane that appears after clicking the CA tab is the XP Continuous Access main pane, also
known as the Pair Operation pane. To display this pane, click Pair Operation on other XP Continuous
Access panes.
The XP Continuous Access main pane displays information about the selected CU image of the
connected disk array. From this pane, you can configure volume pairs. This section describes
components of the XP Continuous Access main pane. For information about XP Continuous Access
volume pair configuration, see
“Performing XP Continuous Access pair operations” (page 94) .
Information displayed on the XP Continuous Access main pane is updated when the XP Continuous
Access main pane is opened, the tab is switched from one to another, and Refresh ( ) is clicked.
The pair information is also updated by clicking Apply.
The XP Continuous Access main pane contains the following items:
•
CU Number/Port Number tree: The Subsystem folder displays CU images, ports, host groups,
or iSCSI targets. Only the CU/port containing LUs appears in the CU Number/Port Number
tree. You can select a CU image, port, host group, or iSCSI target in the CU Number/Port
Number tree to specify information displayed in the Volume list. You can select only one CU
image, port, host group, or iSCSI target. When a CU includes a volume pair in an error
suspended status, an error icon ( ) appears in the CU number/port number.
•
Volume list: Information for each volume (LU) of the connected disk array (see “Volume list”
(page 53) ). Information displayed in this list is sorted in Port number order by default.
Information about LUs defined for several paths is displayed in several rows (as many as the
path defined).
•
Display Filter button: Opens the Display Filter pane (see “Display Filter pane” (page 55) ),
which you use to select volumes displayed in the Volume list. Select volumes by specifying the
G-ID, port (if a CU image is selected), CU image (if a port is selected), pair type (sync and/or
async), volume type (P-VOL and/or S-VOL, internal and/or external VOL), CT group, path
type, CLPR, pair status, and async status.
•
Snapshot button: Writes the user-selected XP Continuous Access pair status information to a
text file.
•
Previous and Next buttons: In the Volume list, displays eight to twelve rows of LU information
at one time. The 256 rows can be displayed using the scroll bar. The Previous/Next buttons
switches the Volume list to the previous or next 256 rows.
Volume list
This list displays information about each volume (LU) of the connected disk array. Information
displayed in this list is sorted in Port number order by default. Each item can be sorted in ascending
or descending order. To sort items, click the column heading (such as Status or Port). Not all items
in the Volume list can be displayed at one time. To see all items in the list, use the scroll bar below
the Volume list.
XP Continuous Access main pane (Pair Operation pane) 53