HP StorageWorks XP Remote Web Console Software - Manual (Page 56)

Figure 21 Display Filter pane
The Display Filter pane contains the following drop-down lists:
•
G-ID, Port, and CU: Number of G-ID (or all G-IDs), port (or all ports), and CU image (or all
CU images) to be displayed.
•
Type: Pair type: Synchronous,Synchronous-C, or Asynchronous.
•
P-VOL/S-VOL: Volume type: P-VOL or S-VOL.
•
CT Group: Number of consistency group to be displayed. This is available only to
Synchronous-C pairs and for Asynchronous pairs.
•
MCU-RCU Path: Port type: fibre or serial.
•
CLPR: CLPR (or all CLPRs) to be displayed.
•
Internal/External VOL: Volume type, internal or external (or all types), to be displayed.
The Display Filter pane also contains the following items:
•
Status area: Selecting check boxes in this area displays only volumes with the selected pair
status: SMPL, COPY, PAIR, PSUS/PSUE, PDUB (LUSE only), Suspending (async only), and
Deleting (async only). The PDUB check box displays only XP Continuous Access LUSE volumes
with the PDUB status. When this check box is selected, simplex volumes are not displayed.
•
Sub Status area: Used to select consistency status of Asynchronous pairs.
•
Set button: Applies selections to the Volume list, and closes the Display Filter pane.
•
Reset button: Clears selections, and displays default settings (ALL).
Settings on the Display Filter pane are available while using XP Continuous Access until you reset
the settings.
NOTE: You cannot use other panes without closing the Display Filter pane.
XP Continuous Access Snapshot function
This function writes user-selected XP Continuous Access pair status information to a text file on the
array, which you can then download. Status information reported in this file is determined by
selections on the Display Filter pane. Use this function to verify completion of XP Continuous Access
operations.
56 Starting XP Continuous Access