HP StorageWorks XP Remote Web Console Software User Manual
Page 54
NOTE:
To change the number of items that can be displayed without scrolling, change the font
size.
Figure 20 Volume list (partial view)
•
Volume icon: Status of volumes.
shows the icons.
Table 20 Volume icons for XP Continuous Access operations
Explanation
Icon
SMPL
P-VOL
S-VOL
•
Port, G-ID, and LUN: Port number, group number (G-ID), LU host group number and name,
and LU number (LUN).
NOTE:
If # is added to the end of an LDEV number, such as 00:3C#, the LDEV is an external
volume. For details about external volumes, see the HP StorageWorks XP External Storage
Software user guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage
Virtualization System.
NOTE:
Port, G-ID, and LUN display the port number, G-ID, and LUN of the volume that you
specified in the remote storage system when creating the pair. If you change or delete the
port number, G-ID, or LUN of the volume in the remote storage system, incorrect information
will be displayed in Port, G-ID, or LUN. So, unless you have any special circumstances, do
not change or delete the port number, G-ID, or LUN that you specified when creating the pair.
•
Status: See
“XP Continuous Access volume pair status” (page 23)
for further information about
XP Continuous Access pair status.
shows the icons.
Table 21 Status icons for XP Continuous Access operations
Explanation
Icon
SMPL. Volume is not currently assigned to an XP Continuous Access pair. When the paircreate operation
starts the initial copy, the volume status changes to COPY.
COPY. XP Continuous Access initial copy operation is in progress. Data on the pair is not fully identical.
When the initial copy is complete, the status changes to PAIR.
PAIR. Volume is currently assigned to an XP Continuous Access pair, and the pair is 100% synchronized.
All updates from the host to the P-VOL are duplicated at the S-VOL.
PSUE. Pair was suspended by the MCU or RCU due to an error condition. Volumes in this pair are not
synchronized.
PSUS. Pair was split by the user (pairsplit-r), or pair was deleted by the user from the RCU (pairsplit-S).
Volumes in this pair are not synchronized.
54
Starting XP Continuous Access