HP StorageWorks XP Remote Web Console Software - Manual (Page 30)

Table 10 XP Continuous Access Asynchronous suspension conditions
XP Continuous Access Async pairs to be
suspended Detected by Suspension condition
All XP Continuous Access ASYNC pairs with
P-VOLs in the MCU. MCU The MCU could not send a pending recordset
to the RCU before the offloading timer async
option expired.
All XP Continuous Access ASYNC pairs with
P-VOLs in the MCU. MCU During MCU power-on, the MCU could not
establish communications with the RCU before
the RCU ready timeout group option expired.
All XP Continuous Access ASYNC S-VOLs in
the consistency group. RCU The RCU could not settle a pending recordset
before the copy pending timeout group option
expired.
All XP Continuous Access ASYNC S-VOLs in
the consistency group. RCU The RCU could not communicate with the
MCU before the copy pending timeout group
option expired (see
“Modifying consistency
group options (CT Group Option)”
(page 84)
).
Only the affected S-VOL. RCU The RCU could not receive the recordset
successfully due to a hardware failure.
All XP Continuous Access ASYNC S-VOLs in
the consistency group or only the affected
S-VOL, depending on type of failure and error
level XP Continuous Access ASYNC pair
option. RCU The RCU detected a logical error while
selecting the recordset to be settled.
RCU The RCU could not settle the recordset due to
a hardware failure, track condition, or logical
error.
30 Overview of XP Continuous Access operations