Adding and deleting ssids for rcus, Add ssid/delete ssid) – HP StorageWorks XP Remote Web Console Software User Manual
Page 79
NOTE:
After being set, options can be modified and canceled (see
and deleting settings” (page 81)
).
6.
Click Apply on the XP Continuous Access main pane to apply the deletion to the disk array.
Adding and deleting SSIDs for RCUs (Add SSID/Delete SSID)
Before adding an SSID, ensure that the remote copy connection is properly installed. You can add
three SSIDs to each RCU. Before deleting an SSID, ensure that the remaining SSIDs are valid, or
the connection between the MCU and RCU may be lost.
Use the Add SSID and Delete SSID commands to add and delete SSIDs for an existing RCU. When
the Add SSID command is selected, the Add SSID pane appears.
Figure 41 Add SSID pane
The Add SSID pane displays three SSID fields. You can enter up to three SSIDs at one time with
the Add SSID pane. You can add up to four SSIDs (maximum number of SSIDs).
The Cancel button cancels settings you made. The Set button applies settings you made, and
changes the list.
1.
From the CU Number/Port tree on the RCU Operation pane, ensure that the correct CU image
is selected.
2.
From the MCU/RCU list, click the RCU.
3.
To add SSIDs:
a.
Right-click, and click Edit SSID(s)&Path(s).
b.
Right-click, and click Add SSID. The Add SSID pane appears.
c.
Enter new SSIDs in the SSID fields. You can add up to four SSIDs to the RCU.
d.
Click Set to add the SSIDs. The list changes to the SSID Settings Parameter list. The added
SSIDs are listed.
NOTE:
After being set, options can be modified and canceled (see
parameters and deleting settings” (page 81)
).
4.
To delete SSIDs:
a.
Right-click, and click Edit SSID(s)&Path(s).
b.
Right-click, and click Delete SSID. The list changes to the SSID Settings Parameter list.
Only RCUs to be deleted are listed.
NOTE:
After being set, options can be modified and canceled (see
parameters and deleting settings” (page 81)
).
5.
Click Apply on the XP Continuous Access main pane to apply settings to the disk array.
RCU operations
79