HP 3000 Enterprise Virtual Array - Manual (Page 81)

1
2
CXO7589A
Figure 29 Raising a leveler foot
1. Hex nut 2. Leveler foot
3. Carefully move the rack to the installation area and position it to provide the necessary service
areas (see Figure 28 ).
To stabilize the rack when it is in the final installation location:
1. Use a wrench to lower the foot by turning the leveler foot hex nut clockwise until the caster does
not touch the floor. Repeat for the other feet.
2. After lowering the feet, check the rack to ensure it is stable and level.
3. Adjust the feet as necessary to ensure the rack is stable and level.
Enterprise Virtual Array 3000/5000 user guide 81