HP 3000 Enterprise Virtual Array - Manual (Page 109)

Table 34 Power specifications
Voltage Current (A) Power (W)
>Maximum continuous current
+5.1 VDC (with a minimum
+12.2 VDC load of 0A)
26.0 A 132 W
+12.2 VDC (with a minimum +5
VDC load of 4A)
28.0 A 342.0 W
+12.5 VDC 2.0 A 25.0 W
Total 499.0 W
Maximum peak current (simultaneous seek activity)
+5.1 VDC 26.0 A 132.0 W
+12.2 VDC 43.0 A 524.0 W
+12.5 VDC 2.0 A 25.0 W
Total 681.0 W
Fibre Channel switch specifications
The Fibre Channel Switch requires a clean, dry environment for normal operation. Table 35 lists the
specifications for the Fibre Channel Switch.
Table 35 Fibre Channel switch specifications
Specification Description
Weight Approximately 7.0 lbs.
Dimensions 8.50 x 1.57 x 16.00 inches (W x H x D) NOTE: The switch with extender
is 21.66 in (depth).
Operating Temperature 0 °C to 40 °C for normal operation (ambient air temperature)
Storage Temperature -40 °C to 80 °C noncondensing
Power 50 or 60 Hz 100–250 VAC 0.6–0.4 A
Controller specifications
This section defines the physical, power, and environmental specifications of the controller enclosure.
Physical specifications
Table 36 defines the dimensions of the controller.
Table 36 Controller enclosure physical specifications
Specification Installed Shipping
Height 62 mm (2.45 in) 267 mm (10.5 in)
Width 502 mm (19.56 in) 762 mm (30 in)
Depth 444 mm (17.49 in) 762 mm (30 in)
Weight 10.4 kg (23 lb) 12.7 kg (28 lb)
Enterprise Virtual Array 3000/5000 user guide 109