beautypg.com

Status indicators, 23 controller ocp, 22 controller status indicators – HP 3000 Enterprise Virtual Array User Manual

Page 69: 23 controller port status indicators

background image

CXO7638A

1

2

3

Figure 23 Controller OCP

1. Status indicators (see

Table 22

)

2. 40–character alphanumeric display
3. Left, right, top, and bottom push buttons

Status indicators

The status indicators display the operational status of the controller. The function of each indicator is

described in

Table 22

. During initial setup, the status indicators might not be fully operational.

The following sections define the alphanumeric displays modes, including the possible displays, the valid

status indicator displays, and the push button functions.

Table 22 Controller status indicators

Indicator

Description

Fault

When this indicator is on there is a controller problem. Check either HP

Command View EVA or the LCD Fault Management displays for a definition of

the problem and recommended corrective action.

Host Link

When this indicator is green, there is a link between the storage system and a

host. When red, there is no link between the storage system and a host.

Controller

When this indicator is flashing slowly, a heartbeat, the controller is operating

normally. When this indicator is not flashing, there is a problem.

Cache Battery

When this indicator is off, the battery assembly is charged. When this indicator

is on, the battery assembly is discharged.

Each port on the rear of the controller has an associated status indicator located directly above it.

Table 23

lists the port and its status description.

Table 23 Controller port status indicators

Port

Description

Fibre Channel host ports

Green—Normal operation

Amber—No signal detected

Off—No SFP

1

detected

Fibre Channel device ports

Green—Normal operation

Amber—No signal detected or the controller has failed the port

Off—No SFP

1

detected

Fibre Channel cache mirror ports

Green—Normal operation

Amber—No signal detected or the controller has failed the port

Off—No SFP

1

detected

1

On copper Fibre Channel cables, the SFP is integrated into the cable connector.

Enterprise Virtual Array 3000/5000 user guide

69