HP 3000 Enterprise Virtual Array - Manual (Page 45)

0107a
1
2
3
Figure 11 I/O module
1. Status indicators (Upper port, Power, and Lower port)
2. Upper port
3. Lower port
The I/O modules are functionally identical, but are not interchangeable. Module A can only be installed
at the right end of the enclosure, and module B can only be installed at the left end of the enclosure. See
Figure 10 .
Each I/O module has two ports that can both transmit and receive data for bidirectional operation.
Activating a port requires connecting a FC cable to the port. The port function depends upon the
loop. See Figure 12 .
CXO7954A
3 1
4 2
Figure 12 Input and output ports
1. Loop A lower port 2. Loop A upper port
3. Loop B lower port 4. Loop B upper port
I/O module status indicators
There are three status indicators on the I/O module. See Figure 11 . The status indicator states for
an operational I/O module are shown in Table 7 . Table 8 shows the status indicator states for a
non-operational I/O module.
Enterprise Virtual Array 3000/5000 user guide 45