HP 3000 Enterprise Virtual Array - Manual (Page 110)

Power specifications
Table 37 and Table 38 define the controller power supply input power requirements and output power
specifications.
Table 37 Controller power supply AC power requirements
AC Input Voltage Frequency
Minimum Nominal Maximum Maximum Minimum
180 VAC 202 VAC 220 VAC 47 Hz 50 Hz
208 VAC 57 Hz 60 Hz
208 VAC 240 VAC 254 VAC
Table 38 Controller power supply output specifications
Voltage Specification Minimum Nominal Maximum
+3.3 VDC
Output Voltage Steady state current
Power
3.23 VDC 3.30 VDC 3.36 VDC 18 A
59.4W
+5.1 VDC
Output Voltage Steady state current
Power
4.80 VDC 5.00 VDC 5.25 VDC 5.0 A
25.5 W
Total Current Total Power 24 A 105.6 W
1. +3.3 VDC steady state current requires a minimum 5.0-V load of 1 A.
2. Total power includes 14.0 watts for the internal blower.
Table 39 defines the AC input current and wattage to the controller power supplies.
Table 39 AC input current and wattage
Nominal Maximum
Input Voltage Amps Watts Amps Watts
60-Hz input
100 VAC 0.928 94 1.53 150
120 VAC 0.788 94 1.25 148
208 VAC 0.576 97 0.73 146
50–Hz Input
220 VAC 0.616 102 0.69 146
240 VAC 0.573 100 0.64 147
Environmental specifications
There are no controller environmental specifications. See the section called “Environmental specifications”
for this information.
110 Regulatory notices and specifications