HP XP20000XP24000 Disk Array - Manual (Page 74)

3-18 Preparing for Cross-OS File Exchange Operations
Hitachi USP V Cross-OS File Exchange User’s Guide
64-Bit FAL/FCU Software
To install the 64bitFAL/FCU software on a UNIX-based platform:
1. Log-in as "root".
2. Set CD-ROM, in which the 64bitFAL/FCU is stored, to the drive.
3. Mount it.
4. Check to see if the following directories currently exist. If they do not, create
them as follows:
a. All Platforms: /usr, /usr/lib
b. Solaris: /usr/lib/sparcv9
c. HP-UX: /usr/lib/pa20_64
5. Move to the root directory
6. Copy 64bitFAL from CD-ROM
7. A file or directory can be viewed using the correct file name given at
mounting. To view a directory, use one of the following procedures according
to platform:
d. Install 64bitFAL after confirming a directory name and a file name by
using the ls command.
– HP-UX (11.0):
#cpio -iBmuv <(MountPoint)/PROGRAM/FAL64/HP_UX/HP_UX.CPI
– Solaris (Solaris 7,8, 9):
#cpio -iBmuv (MountPoint)/PROGRAM/FAL64/SOLARIS/SOLARIS.CPI
– AIX (AIX 4.3.3 ):
#cpio -iBmuv <(MountPoint)/PROGRAM/FAL64/AIX/AIX4/AIX.CPI
– Red Hat Linux AS3.0/IA64:
#cpio -iBmuv <(MountPoint)/PROGRAM/FAL64/LINUX/LINUX.CPI
8. Remove the CD-ROM from the drive.
9. Log-out once and log-in again