HP XP P9500 Storage - Manual (Page 91)

Table 36 Information displayed in Device Name column for remote command device (continued)
Information displayed in Device Name column Storage system
Example: OPEN V-CM, OPEN-3-CM XP24000 Disk Array
XP20000 Disk Array
SANRISE Universal Storage Platform
SANRISE Network Storage Controller
SANRISE 9900V series
TagmaStore Universal Storage Platform
TagmaStore Network Storage Controller
XP1024/XP128 Disk Array
VP9500
H24000
H20000
SANRISE H12000
SANRISE H10000
SANRISE H1024/H128
P9500
XP24000
XP20000
XP12000
XP10000
XP1024/XP128
DF600F-CM Adaptable Modular Storage
Workgroup Modular Storage
SANRISE 9500V series
Thunder 9500V series
•
If you access the remote command device from an OPEN host, the device information that is
reported by the remote command device is about the command device, which is mapped as
a remote command device, of the external storage system.
Information about the command device reported to the host by the remote command device
includes the following:
◦ Serial number
◦ Vendor
◦ Device name
The device name that is reported to the host is same as the one displayed in the Device
Name column of the Mapped Volumes window. For the device name that is reported to
the host, see
Table 36 (page 90) .
•
Even if the status of the remote command device is normal, an error may occur when the
operations or commands are performed on the remote command device.
If an error occurs even though the status of the remote command device is normal, check the
status of the command device of the external storage system, not the remote command device.
•
The following table lists restrictions for mapping a command device as a remote command
device.
Guidelines for remote command devices 91