HP XP P9500 Storage - Manual (Page 69)

A Connecting external storage systems
This appendix provides configuration information for connecting various external storage systems
to the P9500 storage system.
AMS/WMS storage system
System parameters
The following table explains whether to specify system parameters when making settings on ports
on the AMS and WMS storage systems. You can either specify or omit any other parameters.
When connecting an AMS or WMS storage system, use the appropriate configuration tool for
your storage system, such as Storage Navigator Module or Storage Navigator Module2, to set
the data transfer speed of the external port to a fixed value other than the Auto. Also, set the data
transfer speed of the target port of the AMS/WMS storage system to a fixed value according to
the data transfer speed of the external port.
Table 9 System parameters (AMS/WMS)
Parameter settings Parameters Window names
Start Attribute Boot Options
Specify this parameter when AMS/WMS storage system
is in the one controller configuration. Single Mode
Specify this parameter when AMS/WMS storage system
is in the two controller configuration. Dual Active Mode
This parameter is optional. Delay Planned Shutdown
This parameter is optional. Drive blocking mode
Keep this parameter as Hitachi (default), and do not
change. Vendor ID
Keep this parameter as DF600F (default), and do not
change. Product ID
This parameter is optional. ROM Microprogram Version
This parameter is optional. RAM Microprogram Version
This parameter is optional. Option System Parameter
Specify this parameter to Reset of occurred. Operation if the processor failure
occurs
This parameter is optional. WEB Title
Set this parameter to ON for AMS 1000, AMS 500, AMS
200 and WMS 100. Write and verify mode
Set this parameter to OFF for AMS 2500, AMS 2300
and AMS 2100.
This parameter is optional. Port Option Port Options
Set this parameter to Standard Mode. Host Connection Mode 1 Host Connection
Mode
Do not specify any parameters. Host Connection Mode 2
As for AMS 1000, AMS 500, AMS 200 and WMS 100,
do not specify HISUP OFF mode either.
AMS/WMS storage system 69