HP XP P9500 Storage - Manual (Page 72)

If the status of the external volume changes to Blockade, the external volume will be automatically
restored in several hours. You can also manually restore the external volumes by using the Reconnect
External Volumes command.
Thunder 9500V storage system
System parameters
The following table explains whether to specify system parameters when making settings on ports
on the Thunder 9500V storage system.
Table 13 System parameters (9500V)
Parameter settings Parameters Window names
Start Attribute System Startup Settings
Specify this parameter when Thunder 9500V storage
system is in the one controller configuration. Single Mode
Specify this parameter when Thunder 9500V storage
system is in the two controller configuration. Dual Active Mode
Be sure to specify that Data Share Mode will be used.
Do not specify this parameter. Hot Stand-By Mode
This parameter is optional. Delay Planned Shutdown Common 1
This parameter is optional. SCSI Fibre Channel Common Options OPTION 1
This parameter is optional. SCSI Fibre Channel Common Options OPTION 2
Specify this parameter to Reset if it occurred. Operation if the processor failure
occurs Data Striping
Specify this parameter ON. Command Queuing Mode Inquiry Setting
Keep this parameter as Hitachi (default). Vendor ID
Keep this parameter as DF600F (default). Product ID
This parameter is optional. ROM Microprogram Version
This parameter is optional. RAM Microprogram Version
This parameter is optional. WEB Title
Reset/LIP Mode Port Type
This parameter is optional. Reset/LIP Mode (Signal)
This parameter is optional. Reset/LIP Mode (Process)
This parameter is optional. LIP Reset Mode
This parameter is optional. RS232C Error Information Outflow
Mode Controller Option
Set this parameter to ON. Write and verify mode
Set this parameter to Standard Mode. Host Connection Mode 1 Host Connection Mode
Specify HISUP Mode. Host Connection Mode 2
Do not specify any other parameters.
72 Connecting external storage systems