Error in executing report configuration tool – HP XP RAID Manager Software User Manual
Page 72
Report_DailyConfigurationReport_2.tgz
and
Report_DailyConfigurationReport_3.tgz
, and
Report_DailyConfigurationReport_1.tgz
are newly created. Since
Report_DailyConfigurationReport_3.tgz
is overwritten, the reports for three days are
always accumulated in the C:\Reports folder.
C:\Reports
CreateReport.bat
DownloadReport.bat
Report_DailyConfigurationReport_1.tgz <-Generated today
Report_DailyConfigurationReport_2.tgz <-Generated yesterday
Report_DailyConfigurationReport_3.tgz <-Generated two days ago
Error in executing Report Configuration Tool
When using the Report Configuration Tool, you might see Remote Web Console error codes and
other error codes that are unique to the Report Configuration Tool. For Remote Web Console error
codes, see HP P9000 Remote Web Console Messages. The error codes unique to the Report
Configuration Tool and the corresponding actions are as follows.
Return value
Cause of error and action
Error message
Error code
131
A certain period of time elapsed after a
login. Log in again.
A certificate does not become
effective.
EW_COMERR
Please login again.
131
A command was entered before a login.
Log in and then enter the command.
Login is necessary.
Please login again.
EW_COMERR
131
The specified folder to download to is not
found. See
No such folder.
Please refer to the help.
EW_ENFILE
Command Reference (raidinf commands)”
(page 102)
and specify the parameter again.
245
Allocation of internal memory fails.
Terminate unnecessary programs or reboot
the server.
Memory allocate error.
Please other program terminate.
EW_ENOMEM
131
You cannot use the report name specified
by the -report option. Check the report
name and specify a new one.
Report name reserved.
Please check input '-report'
parameter.
EW_INVOPA
131
The hyphen (-) is not added to the option
parameter. See
Invalid option.
Please refer to the help.
EW_INVOPT
Command Reference (raidinf commands)”
(page 102)
and specify a new parameter.
131
Either of the following causes is possible.
Argument too long.
Please refer to the help.
EW_LNGARG
•
The length of a parameter of the
command exceeds 256 bytes.
•
The length of all the parameters of the
command exceeds 1,021 bytes.
See
“Report Configuration Tool Command
Reference (raidinf commands)” (page 102)
and specify a new parameter.
131
The maximum number of SVPs that you can
connect simultaneously is exceeded. Log out
of unnecessary SVPs and reconnect.
Maximum application start.
Please check starting application.
EW_MAXAPP
131
The number of parameters of the command
exceeds 10. See
Maximum argument.
Please refer to the help.
EW_MAXARG
72
Viewing and managing the storage system