HP XP RAID Manager Software - Manual (Page 118)

Edit Storage System window
Set the storage system information. The configured values are required to use SNMP agents. Make
sure to document the information, because the settings will be cleared when the SVP is replaced.
•
Enter a device name using up to 180 alphanumeric characters (ASCII codes), except for some
symbols, such as ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, and %.
•
You can also use a space, except for before and after the device name.
CAUTION: If you want to change multiple parameters twice or more, wait until the currently
applied task finishes, and then perform the next setting change.
If you perform the next setting change (the next task) before the currently applied task finishes, only
the setting done by the next task will be applied, so the result might be different from what you
expected.
Setting fields
Description Item
Enter the device name of the storage system. Storage System
Name
Enter the contact information such as personnel and telephone number where you can inquire
about the storage system. Contact
Enter the location of the connected storage system. Location
118 Remote Web Console GUI reference (main window)