HP XP RAID Manager Software - Manual (Page 156)

Setting fields
Description Item
Specify whether SIMs are reported to syslogs in the primary server. Primary Server
•
Enable: SIMs are reported to syslogs in the primary server.
• Disable: SIMs are not reported to syslogs in the primary server.
Specify an IPv4 and IPv6 address of the primary syslog server. Primary Server - IP Address
•
To specify an IPv4 address, select IPv4 and enter 4 numbers (0-255).
For example:
XXX.XXX.XXX.XXX (X indicates a digit)
•
To specify an IPv6 address, select IPv6 and enter 8 hexadecimal numbers (0-FFFF).
For example:
YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Y indicates a hexadecimal digit)
Enter a port number of the primary syslog server. Primary Server - Port
Number
The default port number displays. You can also specify any port number.
Specify if SIMs are to be reported to syslogs in the secondary server. Secondary Server
• Enable: SIMs are reported to syslogs in the secondary server.
•
Disable: SIMs are not reported to syslogs in the secondary server.
Specify an IPv4 or IPv6 address of the secondary syslog server. Secondary Server - IP
Address
• To specify an IPv4 address, select IPv4 and enter 4 numbers (0-255).
For example:
XXX.XXX.XXX.XXX (X indicates a digit)
• To specify an IPv6 address, select IPv6 and enter 8 hexadecimal numbers (0-FFFF).
For example:
YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Y indicates a hexadecimal digit)
Enter a port number of the secondary syslog server. Secondary Server - Port
Number
The default port number displays. You can also specify any port number.
Specify any name to identify the storage system that notifies the syslog server of SIMs. Location Identification Name
You can specify up to 32 letters and numbers of ASCII code characters and the following
symbols:
! " # $ % & ' ( ) = - ~^ | \ { } [ ] @ `: ; * + _ ? / < > .
You cannot specify commas (,) and spaces.
Sends a test SIMs to syslogs as you configure the servers. Send a test message
156 Remote Web Console GUI reference (main window)