HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 86)

EN Printing from Tray 4 (some printer models only) 85
5 Load up to 2,000 sheets of 20 lb
(75 g/m
2
) bond paper into the input
tray. For information on loading
different types of media, see
“
Orienting Media for All Other Trays ”
later in this chapter.
CAUTION
Do not place anything in the input tray to
the left of the media guides because the
input tray will not be able to lift the media
to print and could damage the input tray.
Also, do not fill the input tray above the
media-fill mark on the left media guide.
Excessive media can cause media jams.
6 Press down on all four corners of the
media stack to ensure the media
rests flat in the input tray.
7 Close tray 4.
8 Set the media type in the printer
control panel. For more information
on configuring the printer control
panel, see “
Configuring Media Type
and Size ” in chapter 2 .
Note
Always configure the media type in the
printer control panel to prevent printing
on the wrong media type (such as
transparencies instead of plain paper).
To print from tray 4
1 Select the media type and size from your application or the printer
driver. To set the media type and size in the printer control panel,
see “
Configuring Media Type and Size ” in chapter 2 .
2 Print the file from your application.