HP Color LaserJet 8550 Multifunction Printer series User Manual
Page 158
EN
Printer Messages 157
TRAY 1 SIZE =
This message is displayed
when media is placed in tray
1.
is the last media size
configured for the input tray.
Press
-V
ALUE
+
to view the
choices. Press
S
ELECT
when
the choice you want is
displayed, and then press
G
O
to bring the printer online. If
no key is pressed for 30
seconds after the media is
detected in the input tray, the
displayed size will
automatically be selected, the
message will be cleared, and
printing will begin.
TRAY 4
COMM ERROR
CHECK CABLES
AND CYCLE POWER
Indicates a communication
error between tray 4 and the
printer.
Verify that the communication
and power cables are
connected. Press
G
O
to
continue printing. If the
message persists, turn the
printer off and on to reset the
printer. If the condition still
persists, contact a local
authorized HP dealer or
service representative for
service.
TRAY X EMPTY
An input tray not currently
selected has run out of
media.
X
is the input tray number.
is the last media type
configured for the input tray.
is the last media size
configured for the input tray.
Load the media type and size
specified on the printer control
panel display. For more
information on loading media,
see chapter
, “
TRAY X LIFTING
The specified input tray is
lifting the media into position
for printing.
X
is the input tray number.
No action is required.
Message
Description
Recommended Action