HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 37)

36 2 Using the Printer Control Panel EN
COLOR ADJUST
MENU PRINT
TEST PAGE
BLACK SMOOTH
VALUE= 0
CYAN SMOOTH
VALUE= 0
MAGENTA SMOOTH
VALUE= 0
YELLOW SMOOTH
VALUE= 0
BLACK DETAIL
VALUE= 0
CYAN DETAIL
VALUE= 0
MAGENTA DETAIL
VALUE= 0
YELLOW DETAIL
VALUE= 0
a. Appears only if the printer has a disk installed.
b. Appears only if an EIO card is installed and an EIO page exists.
c. QUICK COPYJOBS MENU and PRIVATE/JOBS MENU only appear if disk is installed and at least one job
is in the queue.
d. Appears only if tray 2 is properly installed.
e. Appears only if tray 4 is properly installed.
f. Appears only if the optional duplexer is installed.
g. Appears only if the optional duplexer is installed and DUPLEX is set to ON .
h. Appears only if NEW TONER = YES .
i. Initialize functions only appear if appropriate disk is installed.
j. This setting will default to A4 in some countries/regions.
k. UNIT OF MEASURE , X DIMENSION , and Y DIMENSION only appear if CONFIGURE CUSTOM is set to YES .
l. Tray 2 items appear only if tray 2 is installed.
m. Tray 4 items appear only if tray 4 is installed.
n. Appears only if appropriate device (EIO) menu exists.
Menu Item Factory Default