HP Color LaserJet 8550 Multifunction Printer series User Manual
Page 151
150 7 Printer Control Panel Messages
EN
MANUALLY FEED
The printer is requesting a
sheet of media or envelope to
be manually fed.
is the media type
specified in the printer driver
or application.
is the media size
specified in the printer driver
or application.
Load the requested media
type and size into tray 1. If the
proper media size is already
loaded into tray 1, press
G
O
to
initiate printing. For more
information on loading media
in tray 1, see “
MEMORY SHORTAGE
PAGE SIMPLIFIED
The printer is compressing
the print job so that all of the
job will fit into the available
printer memory. The print
job's appearance might be
altered by the compression of
the data.
If possible, simplify the print
job by lowering the resolution
of graphics. Or, install more
printer memory. For more
information on printer memory
options, see “
.
NEW TONER
CARTRIDGE? = NO
This message will appear if
the printer senses that a
TONER LOW
or
TONER OUT
message has appeared and
then gone away, indicating
that a new toner cartridge
may have been installed.
Change to
YES
and press
S
ELECT
if you just installed a
toner cartridge.
Press
I
TEM
+
until you see
NEW TONER=
BLACK
.
Press
V
ALUE
+
until the new
cartridge appears, then press
S
ELECT
.
NO JOB
TO CANCEL
C
ANCEL
J
OB
was pressed and
there is no job to cancel.
No action is required.
OFFLINE
The printer is offline. No error
messages are pending.
Press
G
O
to bring the printer
online.
OUT OF MEMORY
JOB CLEARED
The printer personality for the
current job could not be run in
the available memory. The job
was canceled, and no pages
were printed.
Reprint the job. If the
message still appears, turn
the printer off and on to reset
the printer before sending the
print job again.
Message
Description
Recommended Action