HP Designjet Z6100 Printer series - Manual (Page 71)

NOTE: Shake the ink cartridges and printheads vigorously before installing them. See Insert an
ink cartridge on page 61 and Insert a printhead on page 64 .
Work with ink system components
Remove an ink cartridge
Ink cartridges should be removed for the following two reasons:
● The ink cartridge is very low and you want to replace it with a full cartridge for unattended printing.
You can use the remaining ink in the first cartridge at a more convenient time.
● The ink cartridge is empty or faulty, and you must replace it to continue printing.
CAUTION: The procedure to remove an ink cartridge must be initiated from the front panel. Do
not remove an ink cartridge until the front panel prompts you.
CAUTION: Remove an ink cartridge only if you are ready to insert another one.
WARNING! Make sure that the printer wheels are locked (the brake lever is pressed down) to
prevent the printer from moving.
1
.
On the printer's front panel, select the icon, and then select Replace ink cartridges.
2
. Grip the blue tab in front of the cartridge that you want to remove.
Work with ink system components 59
Handle t
h
e ink system