Load a roll onto the spindle, Handle the paper – HP Designjet Z6100 Printer series User Manual

Page 42

Paper type

Product name

Front panel name

Technical Paper

Natural Tracing Paper

Translucent Bond

Vellum

Film

Transparent/Clear Film

Matte Film

Proofing Paper

HP Professional High-gloss Contract

Proofing Paper

HP HG Contract Proofing

HP Professional Semi-gloss Contract

Proofing Paper

HP SG Contract Proofing

HP Proofing Matte

Proofing Gloss Paper

Proofing Semi-Gloss/Satin Paper

Proofing SG/Satin Paper

Proofing Matte Paper

Self-Adhesive Material

Adhesive Polypropylene

Adhesive Vinyl

Fabric/textile Material

(Shown only if a custom paper is

downloaded from the Internet)

TBD

Load a roll onto the spindle

Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer

from moving.

Remove the first end of the spindle from the right side of the printer, and then move the spindle to

the right in order to extract the other end. Do not insert your fingers into the spindle supports during

the removal process.

The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end

to mount a new roll. The hub slides along the spindle to hold rolls of different widths.

Table 4-1

Supported paper types (continued)

30 Chapter 4 Handle the paper

Handle the paper