Task 3: handle the ink system, Appendix a – HP Designjet Z6100 Printer series User Manual
Page 215

Task Elements
See this section of the user’s guide
I can't load the paper
See
The paper cannot be loaded successfully on page 163
I can't find the paper profile for my paper See
Download paper profiles on page 47
and
Update the printer firmware
on page 141
I don't have HP paper
See
Use non-HP paper on page 47
and
Supported paper types on page 28
The paper has jammed
See
The paper has jammed on page 163
The take-up reel paper has jammed
See
Take-up reel paper jammed on page 165
The take-up reel does not wind
See
Take-up reel does not wind on page 165
NOTE:
For additional information about paper, see
Handle the paper on page 26
.
Task 3: Handle the ink system
Ensure that ink consumables levels are adequate to accommodate all of the queued jobs and the new
order. If the ink consumables levels are too low, pause the print queue and replace and align the
components as necessary.
The table below identifies sections of this user’s guide which will help you to quickly find information on
handling the ink system.
Table A-2
Handle the ink system
Task Elements
See this section of the user’s guide
Check ink cartridge statistics
See
Check the status of the ink cartridges on page 76
Remove an ink cartridge
See
Remove an ink cartridge on page 59
Insert an ink cartridge
See
Insert an ink cartridge on page 61
Check printhead statistics
See
Check the status of a printhead on page 77
Remove a printhead
See
Remove a printhead on page 61
Insert a printhead
See
Insert a printhead on page 64
Align printheads
See
Align the printheads on page 71
Remove the maintenance cartridge
See
Remove the maintenance cartridge on page 73
Insert the maintenance cartridge
See
Insert the maintenance cartridge on page 75
Troubleshooting
See this section of the user's guide
I cannot access the Embedded Web
Server
See
Cannot access the Embedded Web Server on page 174
I cannot insert an ink cartridge
See
Cannot insert an ink cartridge on page 168
I cannot insert a printhead
See
Cannot insert a printhead on page 168
The printer will not recognize the
printhead
See
Clean the electrical connections on a printhead on page 67
NOTE:
For additional information about the ink system, see
Handle the ink system
on page 56
.
Table A-1
Handle the paper (continued)
Task 3: Handle the ink system 203
Appendix A