Task 3: handle the paper, Ap pen d ix b – HP Designjet Z6100 Printer series User Manual
Page 219

Table B-1
Handle print jobs
Task Elements
See this section of the user’s guide
Submit a job
See
Submit a job on page 94
Save a job
See
Save a job on page 95
Cancel a job
See
Cancel a job on page 96
Manage the print queue
See
Manage the print queue on page 96
Troubleshooting
See this section of the user's guide
I can't access the Embedded Web Server See
Cannot access the Embedded Web Server on page 174
NOTE:
To improve color consistency between prints or from one printer to another, consider
performing a color calibration. For more information on color calibration, see {ref: Color
calibration}.
Task 3: Handle the paper
The new job requires different paper than the job that was interrupted. The following steps will help you
to handle the paper.
1
.
Remove the printed output from the plotter and annotate what the remainder of the job.
2
.
Unload the currently loaded paper.
3
.
Load the correct paper for the new job.
NOTE:
To improve color consistency between prints, or from one printer to another, consider
performing a color calibration. For more information on color calibration, see
Color calibration
on page 110
.
The table below identifies sections of this user’s guide which will help you to quickly find information on
handling paper.
Table B-2
Handle the paper
Task Elements
See this section of the user’s guide
Unload paper
See
Unload a roll from the printer on page 36
Unload a roll from the take-up reel
See
Unload a roll from the take-up reel on page 43
Load paper
See
Load a roll onto the spindle on page 30
Load a roll onto the take-up reel
See
Load a roll onto the take-up reel on page 38
Check the paper profile
See
View information about the paper on page 45
Perform color calibration
See
Color calibration on page 110
Troubleshooting
See this section of the user's guide
I can't load the paper
See
The paper cannot be loaded successfully on page 163
I can't find the paper profile for my paper See
Download paper profiles on page 47
and
Update the printer firmware
on page 141
I don't have HP paper
See
Use non-HP paper on page 47
and
Supported paper types on page 28
The paper has jammed
See
The paper has jammed on page 163
Task 3: Handle the paper 207
Ap
pen
d
ix
B