HP Designjet Z6100 Printer series - Manual (Page 107)

2
. Go to the Submit job page on the Main tab.
3
. Click the Add files button to Browse your computer and select the files to print.
NOTE: Submitting a print job through the Embedded Web Server does not require you to
have the printer driver or the software that was used to create the file installed on your
computer.
4
. Set any other job options you may want from within the Job settings tree.
If you leave an option set to Default, the setting that was saved in the job will be used. If the job
contains no setting for that option, the setting in the printer will be used. The setting in the printer can
be changed on the front panel, or, in some cases, through the Device Setup page in the Embedded
Web Server.
5
. Click the Print button.
NOTE: Be aware that when you submit more than one job at a time by clicking the Add files
button in the Embedded Web Server, all of the jobs that you submit will adopt the settings of the
final job that you submit. However, none of the jobs in the print queue are affected.
Save a job
You can only save a job while submitting it for printing:
1
. Access the Embedded Web Server. See Embedded Web Server setup options on page 23 .
2
. Go to the Submit job page on the Main tab.
3
. Click the Add files button, browse your computer, and select the file to print.
4
. If you want to submit more than one file, click the Add files button to add more files.
5
. In the Job settings tree, go to Basic settings and set the Store job in printer option to On.
6
. Set any other job options that you want from within the Job settings tree.
7
. Click the Print button.
The job appears on the Stored jobs in printer page on the Main tab.
Manage print jobs 95
P
ri
nt opti
ons