HP Integrity NonStop H-Series - Manual (Page 44)

Operating the 5258ACL Tape Drive
5258ACL Installation and User’s Guide — 522345-001
3- 16
Displaying Firmware Revision
Escape. Press Enter to validate the unlock code or Escape to exit. If the code is correct,
the Main menu appears. If the code is incorrect, an error screen appears.
Displaying Firmware Revision
The library robotics firmware revision can at any time. It appears as one of the items on
the Library Status submenu under the Show Status menu. It appears on line 2 of the
POST screen and the Initialization Screens.
Displaying Error Logs
To display the error history of the module, use the Show History menu, as follows:
1. At the Default screen, press Enter to enter the Menu mode. The Main menu
appears.
2. At the Main menu, scroll down until the " is next to “Show History Menu.”
3. Press Enter to select the submenu.
4. At the Show History submenu, scroll down so that the " is next to “Error History.”
5. Press Enter to select the function. A circular list of 4-line error reports appears in
the format shown in Figure 3-20 .
6. Scroll through the list to display the error history of the module.
Figure 3-20. Error History Screen
Fault Code: XXXX
% % % %
Error Description
DD/MMM/YYY HH:MM:SS