HP Integrity NonStop H-Series - Manual (Page 19)

5258ACL Installation and User’s Guide — 522345-001
2 -1
2
Installing and Configuring the
5258ACL Tabletop Drive
This section includes these topics:
Attaching the Power Cord
1. Check that the power is off (the LCD screen is blank and no lights are illuminated).
2. Connect the power cord to the 5258ACL power receptacle, and check that it is fully
seated.
3. Connect the other end of the power cord to a nearby AC outlet.
Topic Page
Attaching the Power Cord 2-1
Installing Host Interface Cables 2-2
Installing Interface Cables at the Host 2-3
Powering on the Tape Drive
Attaching the Power Cord
Installing Host Interface Cables
Installing Interface Cables at the Host
Powering on the Tape Drive 2-3
Configuring the 5258ACL Tape Drive 2-3
Setting Up Reserved Slots 2-5
Descriptions of Configuration Options 2-6
Caution. The 5258ACL drive does not have protection against lightning surges. For this
reason, those customers located in high-risk areas should use external surge protection rated
for use in their location and be able to handle the power demand of the tape drive.