HP StorageWorks 1510i Modular Smart Array - Manual (Page 96)

data protection methods (See also RAID levels.) ,
86
data stripes, defined , 85
default access permissions , 15
Delete task, described , 63
deleting components , 63
DHCP Setting , 35, 36
Diagnose tab
described , 77
diagrams
hardware/device , 30
path/accessibility , 32
storage , 31
Disable Standby Controller task, described , 64
disabling the array accelerator , 59
disabling the standby controller , 64
Discovery Settings task, described , 66
distributed data guarding (See RAID 5.) , 88
document
conventions and symbols , 10
prerequisites , 9
related documentation , 9
documentation
HP website , 9
providing feedback , 11
drive array (See array.) , 86
drive mirroring (See RAID 1+0.) , 87
dual-controller configrations
Redundancy Settings task , 64
dual-controller configuration
setting preferred path
LUN , 67
E
Enable/Disable Access Control task, described ,
52
Enable/Disable Port task, described , 64
Ethernet connection
planning considerations , 33
Ethernet iSCSI ports , 33
event log, viewing , 22
Expand Array task, described , 59
Expand Priority , 62
expanding an array , 59
Extend Logical Drive task, described , 60
extending a logical drive , 60
F
fault tolerance
assigning to a logical drive , 42
description of levels , 86
fault tolerance (See RAID methods.) , 86
features of the SMU , 13
firmware
downloading, notes about , 83
MSA, updating , 80
obtaining , 81
updating, prerequisites , 79
Flash Firmware task, described , 79
flashing the firmware , 79
H
hard drives
configuring , 38
protecting against failure of , 86
using spares , 40
help
obtaining , 11
Host Name , 35
HP
technical support , 11
I
Identify Device task, described , 23, 66
identifying devices , 23, 66
initial configuration , 14
initial IP address , 15
initial system configuration, concluding tasks ,
51
initiator
access control lists , 53
adding , 49
CHAP settings , 56
installation, configuration
HP assistance , 11
installing the array controller , 17
IP addresses
assigning TCP ports to , 37
entering , 36
obtaining the default , 15
iSCSI Initiator Name , 50
iSCSI view , 26
iSNS Discovery Mode , 65
iSNS Discovery Settings task, described , 65
L
load balancing, defined , 88
logical drive
characteristics, changing , 58
logical drives
changing the RAID level or stripe size , 60
compared to array , 86
creating , 41
defined , 85
disabling the array accelerator , 59
extending , 60
granting access to , 53
mapping to targets , 47
size option , 42
logical view , 26
LUN
preferred path, setting , 67
96