HP StorageWorks 1510i Modular Smart Array - Manual (Page 58)

Adding a route (Add Route)
To add an entry to the route table for this controller:
1. Select a data port from the system component list, and then select the Add Route task.
2. Enter the IP information for the route.
Changing array or logical drive characteristics
Changes to existing storage arrays or logical drives include:
• Disabling the array accelerator (Array Accelerator Settings)
• Expanding an array (Expand Array)
• Extending a logical drive (Extend Logical Drive)
• Migrating to a different RAID level or stripe size (Migrate RAID/Stripe Size)
NOTE:
To change storage-related settings, expand the View as drop-down box and select the Storage or
Storage with iSCSI view.
58 Configure