Adding authorized initiators – HP StorageWorks 1510i Modular Smart Array User Manual

Page 49

Text mode
Original mode

Figure 12 Sample system configuration—after configuring targets

NOTE:
Figure 12

illustrates the following for Target 1:

•

One logical drive (Logical Drive 1) is mapped to this target.

•

Primary and redundant paths are defined for this target:
• Portal Group “pg1” uses two portals on data port SA0 of the primary Ethernet iSCSI module.
• Portal Group “pg2” uses two portals on data port SB0 of the redundant Ethernet iSCSI module.

Adding authorized initiators

Select Storage System > Add iSCSI Initiator.

HP Storage Management Utility user guide