HP StorageWorks 1510i Modular Smart Array - Manual (Page 65)

Enabling iSNS discovery
Enabling iSNS discovery of storage targets includes:
• Enabling iSNS discovery (iSNS Discovery Settings)
• Enabling iSNS discovery of specific targets (Discovery Settings)
Enabling iSNS discovery (iSNS Discovery Settings)
1. Select Storage System > iSNS Discovery Settings.
2. Expand the drop-down boxes to enable iSNS discovery and enter other iSNS settings.
NOTE:
•
If the storage system is in a separate LAN segment than the iSNS server, be sure to change the
iSNS Discovery Mode to Manual.
• After enabling iSNS discovery for the storage system, you must enable iSNS discovery for
each target you want discovered through the iSNS process. (For more information, see
“ Enabling iSNS discovery of specific targets (Discovery Settings) ” on page 66.)
HP Storage Management Utility user guide 65