6 update, Available tasks, Prerequisites – HP StorageWorks 1510i Modular Smart Array User Manual
Page 79: Updating system firmware (flash firmware), 14 update tab—task listing, Update
6 Update
Updating system firmware (Flash Firmware)
Available tasks
As shown in
, the Update tab includes two options:
• Updating MSA firmware
• Updating hard drive firmware
Figure 14 Update tab—task listing
Prerequisites
Before updating system firmware, make note of the following:
•
When determining which MSA controller firmware version to use, review the requirements and
information in the Compatibility Matrix(es), release notes, and other MSA announcements.
•
Because firmware updates require least one restart of the MSA array and its attached storage
enclosures, update system firmware only during a scheduled maintenance window.
•
Before updating system firmware, stop all host traffic to the array controller.
•
Before updating system firmware, make sure that a recent, known good backup of all data on
the MSA array is available.
•
Before updating system firmware, make sure that a copy of the configuration, including the iSCSI
IP addressing and portal information, along with the hard drive, LUN, and target information is
available.
HP Storage Management Utility user guide
79