HP StorageWorks 1510i Modular Smart Array - Manual (Page 26)

• Configure—For initially configuring a system, entering new information, or changing existing
settings. (For more information, see “ Configure ” on page 25.)
• Wizards—For initially configuring a simple system. (For more information, see
“ Wizards ” on page 69”.)
• Diagnose—For generating an XML-formatted diagnostic report. (For more information, see
“ Diagnose ” on page 77”.)
• Update—For updating MSA controller and module firmware. (For more information see
“ Update ” on page 79.)
Views
As shown in Figure 8 , expand the View as drop-down box to select a viewing option. Your selection
determines which system components are shown, as well as their associated tasks:
• Storage with iSCSI view—Displays all system components and their available tasks ( Figure 8 ).
• Storage view—Displays storage-related items only; no targets or initiators are shown.
• iSCSI view—Displays iSCSI-related items only; no arrays, logical drives, or hard drives are shown.
Figure 8 View as drop-down box
Also shown in Figure 8 , click Show Physical View/Show Logical View to control the display of the
configured storage.
NOTE:
The Show Physical View/Show Logical View toggle affects the view only when storage components
are shown.
• Physical view—Displays a physical representation of the hard drives and configured storage.
• Logical view—Displays a logical representation of the hard drives and configured storage.
NOTE:
In any view, click + or - to expand or contract the items in the system component list.
26 Configure