HP StorageWorks 1510i Modular Smart Array User Manual
Page 75
9.
After completing all steps of the wizard, a final confirmation window is displayed.
• Click Finish to apply the configuration settings.
• Click Back to change settings.
• Click Cancel to exit the wizard.
10.
Wait for the utility to apply your settings.
11.
After all settings have been applied, you may need to change the IP address of your management
client device to be in the same subnet as the address assigned to the management port.
12.
Access the ACU again, and navigate through the Configure and View tabs to familiarize yourself
with the interface, your initial configuration, and available options.
NOTE:
Wizards are available for basic configuration tasks only. Use the Manage and
Configure tabs to view and change your configuration. (For more information, see
” on page 25 or “
IMPORTANT:
Perform the following tasks to complete the configuration:
• Enter security settings (optional, but recommended). (For more information, see
• Enter configuration settings in the iSCSI initiator configuration software utility (on the
server), including:
• Adding target portals for the initiator to access.
• Configuring the target portals. (Be sure to select the option to automatically restore
the connection each time the system restarts.)
• Logging on to establish an active session.
HP Storage Management Utility user guide
75