HP ProLiant SL2500 Scalable System - Manual (Page 95)

CLI commands 95
Show NTP poll
• Command:
SHOW NTP POLL
• Description:
Indicates the time in minutes to poll for time from the configured NTP server.
Disable NTP
• Command:
DISABLE NTP
• Description:
Disables NTP operation. No NTP request is sent out following the DISABLE NTP command.
Connect port
• Command:
CONNECT PORT {1-13} [FORCE]
• Description:
Connects the current CLI session to the specified serial port. When FORCE is specified, the current CLI
console forcibly grabs control of the specified serial port. This is useful when another CLI session is
already connected.
Set port
• Command:
SET PORT [ALL | {1-13}] (9600|19200|38400|56700|115200) [(7|8)(N|E|O)(1|2)]
• Description:
Configure a single port or all serial ports.