Disable telnet, Enable telnet, Disable ssh – HP ProLiant SL2500 Scalable System User Manual
Page 76: Enable ssh, Remove account, Add account
CLI commands 76
Enables network access. Requires a password to be set and enabled. SSH and Telnet access must be
enabled or disabled separately. Also enables remote syslog support.
Disable telnet
•
Command:
DISABLE TELNET
•
Description:
Turns off telnet access to the HP APM board. Existing sessions will not be logged out.
Enable telnet
•
Command:
ENABLE TELNET
•
Description:
Turns on Telnet access to the HP APM.
Disable SSH
•
Command:
DISABLE SSH
•
Description:
Turns off SSH access to the HP APM.
Enable SSH
•
Command:
ENABLE SSH
•
Description:
Turns on SSH access to the HP APM.
Remove account
•
Command:
REMOVE ACCOUNT "
•
Description:
o
Removes the specified account from the system.
o
If the user does not exist, then an error message appears. The Administrator account cannot be
deleted.
Add account