HP ProLiant SL2500 Scalable System - Manual (Page 86)

CLI commands 86
Show servers
• Command:
SHOW SERVERS
SHOW SERVERS
SHOW SERVERS
where:
refers to the HP APM port.
refers to the HP APM port.
• Description:
Shows the same information as the SHOW RACK and SHOW TOPOLOGY commands.
Show topology
• Command:
SHOW TOPOLOGY
SHOW TOPOLOGY
SHOW TOPOLOGY
SHOW TOPOLOGY ALL
where:
refers to the HP APM port.
refers to the HP APM Distribution Module port.
• Description:
o Shows the same information as the SHOW RACK and SHOW SERVERS commands.
o SHOW TOPOLOGY ALL shows the HP Power Management Controller Utility hardware and firmware
versions as well as the license status of all servers in the enclosures.
Show asset info
• Command:
SHOW ASSETINFO
SHOW ASSETINFO
SHOW ASSETINFO
where:
refers to the HP APM port.
refers to the HP APM Distribution Module port.
• Description:
o Shows the chassis in a rack in a report format.
o Also requests and shows any asset tags from the chassis and any HP-sourced 60A PDUs that are in
the rack.