HP ProLiant SL2500 Scalable System - Manual (Page 80)

CLI commands 80
• Description:
Same as RESET.
Reboot CM
• Command:
REBOOT CM
where:
refers to the HP APM port.
refers to the HP APM Distribution Module port.
• Description:
Reboots the HP Moonshot 1500 Chassis CM module.
Reset factory
WARNING: When you enter RESET FACTORY, HP APM erases your entire configuration.
Before resetting factory defaults, consider saving your configuration. For more information on
duplicating your configuration, see "Duplicating the configuration (on page
23 )".
NOTE: This command can only be run from the serial console.
• Command:
RESET FACTORY
• Description:
Restores HP APM to factory settings (including no password and Ethernet disabled) and then reboots HP
APM.
Save
• Command:
SAVE
• Description:
Saves the current configuration to non-volatile memory.
Save config
• Command:
SAVE CONFIG
• Description:
Functionality identical to the SAVE command.