HP ProLiant SL2500 Scalable System - Manual (Page 89)

CLI commands 89
Save zones
• Command:
SAVE ZONES
• Description:
o Commits the defined zones and their member chassis to the on-board EEPROM.
o You can define and save up to four zones. These zones are automatically loaded from the EEPROM
when the board is reset.
Show zones
• Command:
SHOW ZONES
• Description:
Displays all the currently defined zones and their respective member chassis.
Remove zone
• Command:
REMOVE ZONE [[ ]] | [ ALL] | [ALL]
where:
is the zone name.
is the port number.
is the distribution module port number.
is the port number.
If no more chassis exist in the zone after the target chassis is removed, then the zone is automatically
deleted. The syntax for indication which chassis is to be removed is identical to the ADD ZONE
command.
• Description:
Removes one or more chassis from a zone definition.
Enable pollpower
• Command
ENABLE POLLPOWER
• Description
Enables background process that polls each server for power usage.
Disable pollpower
• Command