Cli commands, Clear faults, Clear log – HP ProLiant SL2500 Scalable System User Manual
Page 75: Clear screen, Disable ethernet, Enable ethernet
CLI commands 75
CLI commands
Clear faults
•
Command:
CLEAR FAULTS
•
Description:
Clears the fault log to have 0 entries.
Clear log
•
Command:
CLEAR LOG
•
Description:
Clears all previous event logs.
Clear screen
•
Command:
CLEAR SCREEN
•
Description:
Clears a VT100/ANSI compatible terminal of all characters. Places cursor at position 1,1.
Disable Ethernet
NOTE:
This command can only be run from the serial console.
•
Command:
DISABLE ETHERNET
•
Description:
Disables network access, including SSH and Telnet access and remote syslog support.
Enable Ethernet
•
Command:
ENABLE ETHERNET
•
Description:
This manual is related to the following products: