HP Netserver E Server series - Manual (Page 67)

Chapter 8 Configuring the HP NetServer
61
DiagTools
This utility provides an easy-to-use hardware diagnostic for NetServer
verification, burn-in, and rapid troubleshooting. It must first be copied to diskettes
and then executed from the diskettes.
NOTE HP recommends using the HP DiagTools utility to verify all
NetServer functions are operating correctly, after completing
all the configuration topics. The HP DiagTools utility also
generates a text file containing the hardware detected and the
DiagTools test results. This text file, called a support ticket,
should be saved to a diskette and used for future reference,
especially by your support provider.
Setup (BIOS) Utility
The HP NetServer (BIOS) Setup Utility is used to configure the following
NetServer options:
•
User Preferences
•
Security
•
Configuration
•
Exit
Accessing the Setup Utility
The (BIOS) Setup Utility menu offers the choices listed above, and the
corresponding items are described in the topics below.
1. Turn on the monitor and the HP NetServer.
2. Start the Setup Utility by pressing the [F2] key, when the following
message appears on the boot screen.
Press to enter SETUP