HP Netserver E Server series - Manual (Page 64)

Chapter 8 Configuring the HP NetServer
58
NetServer Navigator CD Archive >> HP NetServer Navigator CD
Status reports are arranged with the most recent archived version first
3. Click on the Document ID number to view the latest Status Report
(Release Notes).
Accessing the HP NetServer Navigator CD-ROM
Use this method to start and access the HP NetServer Navigator CD-ROM.
1. Ensure the HP NetServer is properly connected to the mouse, keyboard,
monitor, and AC power, before attempting to power up the NetServer.
2. Press the power-on button to turn on power to the NetServer.
3. Press the CD-ROM drive eject button.
4. Place the HP NetServer Navigator CD-ROM in the drive, and press the
eject button again to close the drive.
The Navigator CD should start automatically.
5. If the Navigator CD does not start automatically, turn the power off, wait
10 seconds, and turn the power on again.
If the NetServer fails to boot, follow the diagnostic instructions on the
screen.
6. Go to the HP Navigator Main Menu.
For detailed information about using the Navigator CD-ROM refer to the
online Help on the CD.
Viewing the Readme File
This file includes the most recent HP NetServer information that was not available
at the time of publication for this User Guide or the Installation Guide. It is
important to check this file before proceeding with the installation.
1. Start the HP NetServer Navigator CD-ROM, as explained earlier.
2. Go to the HP Navigator Main Menu.
3. Select Readme File.
The Readme file contains the latest information to help you install your HP
NetServer. Read it carefully before beginning your installation.