HP Netserver E Server series - Manual (Page 18)

Chapter 2 Opening and Closing the HP NetServer
12
4. Push the cover forward using the slotted handles until it is seated in place.
5. Replace the six (6) T-15/slotted thumbscrews in the rear. See Figure 2-1.
6. Re-lock the cover with the key lock at the rear of the NetServer.
Adjusting the NetServer Feet
The stabilizing feet are used to steady the HP NetServer during normal operation
and must be turned outward during normal use. When adding internal accessories
or servicing the NetServer, turn the feet inward before laying the NetServer on its
side on the floor or a table. You must reverse the process when placing the
NetServer upright before returning it to normal operation.
Figure 2-4. Turning Feet Inward