HP Netserver E Server series - Manual (Page 36)

Chapter 4 Installing Additional Memory
30
6. Locate the DIMM slots. See Figure 4-2.
System Board (Top View)
DIMM Slots 0 1 2 3
Figure 4-2. DIMM Locations on System Board
7. Remove a DIMM from its container, handling the module by its edges.
Lay it on an anti-static surface.
8. Choose a slot into which you want to install a DIMM.
DIMMs may be installed in any combination, in any slot.
CAUTION Use only HP PC133 (133 MHz) buffered SDRAM DIMMs.