HP Netserver E Server series - Manual (Page 61)

55
8 Configuring the HP NetServer
Introduction
This chapter describes how to configure the HP NetServer with the help of the HP
NetServer Navigator CD-ROM, which is shipped with your NetServer. This
CD-ROM also provides the latest information concerning your NetServer.
As you configure the NetServer, it’s important to have the very latest
configuration information. The CD-ROM will inform you of any applicable
compatibility issues, and provide you with a current list of HP-tested peripherals
and accessories. Refer to the "Tested Products List" on the HP NetServer
Navigator CD-ROM, or on the HP web site at:
http://www.hp.com/go/netserver/
You should also be familiar with HP DiagTools (on the HP NetServer Navigator
CD-ROM) and the HP NetServer Online Documentation CD-ROM to help you
configure the NetServer.
HP NetServer Navigator CD-ROM
The HP NetServer Navigator CD-ROM provides you with two choices for running
the CD-ROM and accessing its configuration information and utilities.
l Run the Navigator CD-ROM on the HP NetServer to obtain the required
configuration information and set up the NetServer.
You need to the run the Navigator CD-ROM on the NetServer to install the
NOS and all the bundled drivers and utilities. Refer to the following topics
for the contents of Navigator’s Main Menu when used on the NetServer.
l Run the Navigator CD-ROM on any Windows PC after setting up the HP
NetServer to obtain the required configuration information.
Refer to "Running the Navigator CD-ROM on a Windows PC" later in the
chapter for more information.
Contents of the HP NetServer Navigator CD-ROM
The Main Menu of the Navigator CD directs you to modules where you can
perform the required configuration tasks, or access the utilities used in the
configuration process. These tasks include: