HP Netserver E Server series - Manual (Page 59)

53
7 Connecting the Monitor, Keyboard,
Mouse, and UPS
Introduction
Use this procedure to connect the peripheral control devices and monitor to the
HP NetServer E 800.
1. Connect the monitor, keyboard, and mouse to the HP NetServer E 800
using the connections provided on the rear of the chassis. See Figure 7-1.
NOTE The two USB connectors are reserved for printers, scanners,
and external modems, but not the keyboard or mouse.
Power
Mouse
Keyboard
USB(2)
LAN Serial A
Parallel
Serial B
Video
SVGA
External SCSI
(Optional)
Power Cord
Strain Relief
Figure 7-1. Rear Panel Ports