HP OneView for VMware vCenter - Manual (Page 58)

value assumes all unallocated space is formatted the same as this volume. For all other
volume types, no value is displayed.
◦ P9000/XP—P9000 or XP thin provisioning pool capacity.
•
Array Disk Emulation Type (P9000 and XP arrays only)—LDEV emulation type.
•
Replicated—Specifies whether the disk is replicated
Viewing virtual disks
The Virtual Disks tab is displayed for selected components. See Figure 30 (page 58) .
Figure 30 Virtual Disks tab
The virtual disks tab displays the following information:
•
Virtual Disk Name—Virtual disk name assigned by VMware
•
Virtual Disk Type—Virtual disk type (VMDK or RDM)
•
Virtual Machine—Name of the VM associated with the selected VMDK or RDM
•
Datastore—Datastore name or the .vmdk name for the RDM
•
Provisioned Capacity—Disk capacity visible to a VM using this VMDK or RDM
•
Allocated Capacity—Disk capacity reserved by VMware for the VMDK or RDM
For an RDM, this value will match the provisioned capacity value. For a VMDK, this value
might be less than the provisioned capacity value if VMware thin provisioning is used. This
is separate from thin provisioning configured in the storage array.
•
VMware Provisioned—Thick or thin
Viewing HBAs
The HBAs tab is displayed for selected components. See Figure 31 (page 58) .
Figure 31 HBAs tab
58 Using Insight Control for vCenter